Oscillations of a circular three-layer plate under external linear in time load

Authors

  • Denis V. Leonenko Belarusian State University of Transport, 34 Kirava Street, Homieĺ 246653, Belarus
  • Marina V. Markova Belarusian State University of Transport, 34 Kirava Street, Homieĺ 246653, Belarus

Keywords:

dynamic deformation of a three-layer plate, quasi-static deformation of a three-layer plate, circular three-layer stepped plate
Supporting Agencies
This work was supported by the Belarusian Republican Foundation for Fundamental Research (project Т22М-072).

Abstract

The problem of dynamic deformation of a circular three-layer plate with a step-variable thickness of the outer layers is considered. The plate deformation model is based on the zig-zag theory. The approach to the consideration of the problem relies on the method of decomposition of the plate geometry. According to this, we represent the equations of motion for each section of the plate with a constant thickness. The derivation of these equations predicated on Hamilton’s variational principle. A particular analytical solution is obtained for forced plate vibration induced by linear in time external action. The represented solution is based on a superposition of quasi-static and dynamic components of the displacement appearing in the plate during vibrations. To test the obtained solution, numerical studies were performed for various materials.

Author Biographies

  • Denis V. Leonenko, Belarusian State University of Transport, 34 Kirava Street, Homieĺ 246653, Belarus

    doctor of science (physics and mathematics), full professor; head of the department of structural mechanics, geotechnical engineering and building structures, faculty of industrial and civil engineering

  • Marina V. Markova, Belarusian State University of Transport, 34 Kirava Street, Homieĺ 246653, Belarus

    postgraduate student at the department of structural mechanics, geotechnical engineering and building structures, faculty of industrial and civil engineering

References

  1. Grigolyuk EI, Kogan FA. [The current state of the theory of multilayer shells]. Prikladnaya mekhanika. 1972;8(6):3–17. Russian.
  2. Carrera E. Historical review of zig-zag theories for multilayered plates and shells. Applied Mechanics Reviews. 2003;56(3):287–308. DOI: 10.1115/1.1557614.
  3. Carrera E. An assessment of mixed and classical theories on global and local response of multilayered, orthotropic plates. Composite Structures. 2000;50(2):183–198. DOI: 10.1016/S0263-8223(00)00099-4.
  4. Xiang Y, Zhang L. Free vibration analysis of stepped circular Mindlin plates. Journal of Sound and Vibration. 2005;280(3–5):633–655. DOI: 10.1016/j.jsv.2003.12.017.
  5. Gupta US, Lal R, Sharma S. Vibration of non-homogeneous circular Mindlin plates with variable thickness. Journal of Sound and Vibration. 2007;302(1–2):1–17. DOI: 10.1016/j.jsv.2006.07.005.
  6. Gao C, Pang F, Li H, Jia D, Tang Y. Steady and transient vibration analysis of uniform and stepped annular/circular plates based on FSDT. Acta Mechanica. 2022;233(3):1061–1082. DOI: 10.1007/s00707-022-03157-y.
  7. Hao Q, Chen Z, Zhai W. Free transverse vibration of circular plate of stepped thickness with general boundary conditions by an improved Fourier – Ritz method. Shock and Vibration. 2022:1643050. DOI: 10.1155/2022/1643050.
  8. Hang LTT, Wang CM, Wu TY. Exact vibration results for stepped circular plates with free edges. International Journal of Mechanical Sciences. 2005;47(8):1224–1248. DOI: 10.1016/j.ijmecsci.2005.04.002.
  9. Duan WH, Wang CM, Wang CY. Modification of fundamental vibration modes of circular plates with free edges. Journal of Sound and Vibration. 2008;317(3–5):709–715. DOI: 10.1016/j.jsv.2008.03.065.
  10. Duan G, Wang X, Jin C. Free vibration analysis of circular thin plates with stepped thickness by the DSC element method. Thin-Walled Structures. 2014;85:25–33. DOI: 10.1016/j.tws.2014.07.010.
  11. Karalevich UV. The field of tensions of a rotating anisotropic disc of a variable thickness loaded with undistracted forces on the outer contour. Journal of the Belarusian State University. Mathematics and Informatics. 2019;2:40–51. Russian. DOI: 10.33581/2520-6508-2019-2-40-51.
  12. Karalevich UV, Medvedev DG. The influence of the length of heat sources on the external border on the temperature distribution in profiled polar-orthotropic ring plates taking into account there heat exchange with the external environment. Journal of the Belarusian State University. Mathematics and Informatics. 2020;3:86–91. Russian. DOI: 10.33581/2520-6508-2020-3-86-91.
  13. Starovoitov EI, Tarlakovsky DV. Stress-strain condition of a three-layer orthotropic plate with the strengthening onlay. Fundamental and Applied Problems of Engineering and Technology. 2014;2:38–43. Russian.
  14. Nguyen CH, Butukuri RR, Chandrashekhara K, Birman V. Dynamics and buckling of sandwich panels with stepped facings. International Journal of Structural Stability and Dynamics. 2011;11(4):697–716. DOI: 10.1142/S0219455411004300.
  15. Nguyen CH, Chandrashekhara K, Birman V. Enhanced static response of sandwich panels with honeycomb cores through the use of stepped facings. Journal of Sandwich Structures & Materials. 2011;13(2):237–260. DOI: 10.1177/1099636210369615.
  16. Starovoitov EI, Poddubny AA. The bending of three-layer beam with variable border laying on the elastic basis. Mechanics of Machines, Mechanisms and Materials. 2011;1:51–55. Russian.
  17. Leonenko DV. Transverse bending of a circular sandwich plate of stepped thickness. Proceedings of Francisk Scorina Gomel State University. 2020;6:151–155. Russian.
  18. Leonenko DV. Local loading of a stepped circular sandwich plate. In: Shimanovskii AO, editor. Mechanics. Researches and Innovations. Volume 14. Homieĺ: [s. n.]; 2021. p. 126–130. Russian.
  19. Leonenko DV. Elastic bending of a three-layer circular plate with step-variable thickness. Mechanics of Machines, Mechanisms and Materials. 2021;1:25–29. Russian. DOI: 10.46864/1995-0470-2020-1-54-25-29.
  20. Parfenava VS. The deformation of the elastic three-layered plate with a step-varied border. In: Shimanovskii AO, editor. Mechanics. Researches and Innovations. Volume 10. Homieĺ: [s. n.]; 2017. p. 157–163. Russian.
  21. Zorich VA. Matematicheskii analiz. Chast’ 1 [Mathematical analysis. Part 1]. 6th edition. Moscow: Izdatel’stvo MTsNMO; 2012. XVIII, 702 p. Russian.
  22. Bauchau OA, Craig JI. Structural analysis. With applications to aerospace structures. Dordrecht: Springer; 2009. Chapter 16, Kirchhoff plate theory; p. 819–914 (Gladwell GML, editor. Solid mechanics and its applications; volume 163). DOI: 10.1007/978-90-481-2516-6_16.
  23. Timoshenko SP. On the correction for shear of the differential equation for transverse vibrations of prismatic bars. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. Series 6. 1921;41(245):744–746. DOI: 10.1080/14786442108636264.
  24. Leonenko DV, Markova MV. Vibrations of a three-layer circular step plate under periodic impact. Mechanics of Machines, Mechanisms and Materials. 2022;3:68–76. Russian. DOI: 10.46864/1995-0470-2022-3-60-68-76.
  25. Nowacki W. Teoria sprężystości. Warszawa: Państwowe Wydawnictwo Naukowe; 1970. 770 s. Russian edition: Nowacki W. Teoriya uprugosti. Pobedrya BE, translator. Moscow: Mir; 1975. 872 p.
  26. Markova MV, Leonenko DV. [Definition of the initial-boundary value problem for axisymmetric vibrations of a circular three-layer plate with variable thickness]. In: Vasilevich YuV, Chigarev VA, Mikulik TN, Savitskaya AV, editors. Teoreticheskaya i prikladnaya mekhanika. Vypusk 36 [Theoretical and applied mechanics. Issue 36]. Minsk: Belarusian National Technical University; 2022. p. 3–10. Russian.
  27. Starovoitov EI, Nesterovich AV. The non-axisymmetric loading of an elastoplastic three-layer plate in its plane. Journal of the Belarusian State University. Mathematics and Informatics. 2022;2:57–69. Russian. DOI: 10.33581/2520-6508-2022-2-57-69.
  28. Tong KN. Theory of mechanical vibration. New York: Wiley; 1960. XII, 348 p. Russian edition: Tong KN. Teoriya mekhanicheskikh kolebanii. Luzhin OV, translator; Sinitsyn AP, editor. Moscow: Mashgiz; 1963. 351 p.
  29. Aramanovich IG, Levin VI. Uravneniya matematicheskoi fiziki [Equations of mathematical physics]. 2nd edition. Moscow: Nauka; 1969. 288 p. (Izbrannye glavy vysshei matematiki dlya inzhenerov i studentov vtuzov). Russian.
  30. Vlasov VZ, Leont’ev NN. Balki, plity i obolochki na uprugom osnovanii [Beams, plates and shells on an elastic foundation]. Moscow: Fizmatgiz; 1960. 491 p. Russian.
  31. Bateman H, Erdélyi A. Higher transcendental functions. Volume 2. New York: McGraw-Hill Book Company; 1953. XVI, 396 p. Russian edition: Bateman H, Erdélyi A. Vysshie transtsendentnye funktsii. Tom 2. Funktsii Besselya, funktsii parabolicheskogo tsilindra, ortogonal’nye mnogochleny. Vilenkin NYa, translator. 2nd edition. Moscow: Nauka; 1974. 296 p. (Spravochnaya matematicheskaya biblioteka).
  32. Watson GN. A treatise on the theory of Bessel functions. 2nd edition. Cambridge: Cambridge University Press; 1944. VIII, 804 p. Russian edition: Watson GN. Teoriya besselevykh funktsii. Chast’ 1. Berman VS, translator. Moscow: Izdatel’stvo inostrannoi literatury; 1949. 799 p.
  33. Pleskachevskii YuM, Starovoitov EI, Leonenko DV. Mekhanika trekhsloinykh sterzhnei i plastin, svyazannykh s uprugim osnovaniem [Mechanics of three-layer bars and plates connected to an elastic foundation]. Moscow: Fizmatlit; 2011. 560 p. Russian.
  34. Ministry of Architecture and Construction of the Republic of Belarus. SP 5.04.01-2021. Stal’nye konstruktsii [CR 5.04.01-2021. Steel construction]. Minsk: [s. n.]; 2021. 147 p. Russian.
  35. Ivanov AM, Algazinov KYa, Martinets DV, Martem’yanov VI. Stroitel’nye konstruktsii s primeneniem plastmass. Primery proektirovaniya i rascheta [Building structures using plastics. Design and calculation examples]. Ivanov AM, editor. Moscow: Vysshaya shkola; 1968. 220 p. Russian.

Downloads

Additional Files

Published

2023-03-28

Issue

No. 1 (2023): Journal of the Belarusian State University. Mathematics and Informatics

Section

Theoretical and Applied Mechanics

License

The authors who are published in this journal agree to the following:

  1. The authors retain copyright on the work and provide the journal with the right of first publication of the work on condition of license Creative Commons Attribution-NonCommercial. 4.0 International (CC BY-NC 4.0).
  2. The authors retain the right to enter into certain contractual agreements relating to the non-exclusive distribution of the published version of the work (e.g. post it on the institutional repository, publication in the book), with the reference to its original publication in this journal.
  3. The authors have the right to post their work on the Internet (e.g. on the institutional store or personal website) prior to and during the review process, conducted by the journal, as this may lead to a productive discussion and a large number of references to this work. (See The Effect of Open Access.)

How to Cite

[1]
Leonenko, D.V. and Markova, M.V. 2023. Oscillations of a circular three-layer plate under external linear in time load. Journal of the Belarusian State University. Mathematics and Informatics. 1 (Mar. 2023), 49–63. DOI:https://doi.org/10.33581/2520-6508-2023-1-49-63.