Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • All materials are in format Microsoft Word (.doc or .docx format), all illustrations and tables are arranged in the text after the references, i.e. the text, illustrations and tables are submitted in one file.
  • The text is typed according to the next parameters: Times New Roman, 12pt size, line spacing 1.5, indention 10 mm, without word wrap. Size of margins is to be: top and bottom – 20 mm, left – 30 mm, right – 20 mm. All pages should be numbered (page numbering should be from the title page). The recommended length of the manuscript, including tables, figures and references – 12–20 typewritten pages of A4 size; short communications – 5–10 typewritten pages. All illustrations, graphs and tables are arranged in the text after the references rather than in the end of file.
  • Each illustration is also arranged in a separate file (.jpg, .cdr, .tiff, .eps, .xls, .psd format).
  • The manuscript has not been published or submitted for publication by other journals (there is explanation for the editor in the comments).
  • The text is to be in accordance with stylistic and bibliographic requirements, stated in the Guideline for authors.

Author Guidelines

ONLINE SUMBISSION

  1. The articles are submitted to the editorial staff via an electronic submission system that allows to speed up the registration of the article, its consideration, the authors can also monitor the article processing.
  2. The corresponding author should register on the journal site. In this case the author can send the article to the editorial staff via special form.
  3. The corresponding author uploads the article and illustrations in separate files. Metadata is to be filled in the suggested form. In addition, an electronic copy of the examination certificate is uploaded as a separate file. The original of the examination certificate is handed over personally to the executive secretary of the editorial board of the journal or sent to the editorial office by regular mail (in the case of authors from other cities).
  4. To submit an article, authors must fulfill the conditions of the checklist for preparing material for dispatch (see above).
  5. When the manuscript is submitted for publication in the journal, the author agrees with the published requirements.

 

 

GUIDELINE FOR THE AUTHOR

The original scientific articles (i.e. the articles covered research results and conclusions and have not been published previously) are accepted for the publication in journals. The articles should comply with the subjects of the journal and should be formatted in accordance with the following requirements. The research should be of interest to the international scientific community. Articles not to meet the requirements will be rejected.

 

General requirements

The articles are accepted in electronic format Microsoft Word (.doc or .docx formats), the file with the article should be named according to author’s surname. If there are several authors, the article file should be named according to the surname of the first author. All illustrations and tables are arranged in the text after the references to them, each illustration and graph is also arranged in separate files (.jpg, .cdr, .tiff, .eps, .xls, .psd formats).

The text is typed according to the next parameters: Times New Roman, 12 pt size, line spacing 1.5, indention 10 mm, without word wrap. Size of margins is to be: top and bottom – 20 mm, left – 30 mm, right – 20 mm. The recommended length of the manuscript, including tables, figures and references – 12–20 typewritten pages of A4 size; brief communication – 5–10 typewritten pages. All pages should be numbered (page numbering should be from the title page).

 

Structure of the article

Title page

The title page should include the following structural elements:

  1. UDC (universal decimal classification);
  2. Title name:

Maximum title length is 10–12 words. Long title names as well as short title names are difficult to perceive.

The title name should be informative and concise, it should correspond to the scientific style of the text, contain keywords, that reflect the research topic (scope), content of the work. The title name should be clear for the reader and easy to search by search systems. Abbreviations and formulas should not been used.

  1. Initials and surname of the author(s).
  2. Affiliation:

The name of organization where the author works (if the author worked and conducted research in several organizations, it is preferable to specify these organizations), address, city and country. Each organization name should be specified in a new line. The counting number in superscript should be written before the organization name and after the author’s surname, that helps to relate the author with the organization.

  1. The abstract should be informative (without general words, original, structured), it should cover principle article content and research results.

Foreign partners and international databases make strict demands to annotations. The annotation should include description of the main subject, problem, object, goal of research, value of research results, and practical relevance of these results. The annotation should reflect new aspects of the scientific article in comparison with other correspondent articles (i.e. articles of the same topic and purpose). It is possible to use unstructured annotations in «Journal of the Belarusian State University. Geography and Geology». The abbreviations should be transcribed.

  1. Keywords:

Key words are a semantic kernel of the article, they are main concepts and categories that describe the research issues. Key words help the readers to search the articles in electronic databases, so the key words should reflect the discipline (i. e. the field of scientific research), subject, goal and object of research.

Key words may be either separate words or phrases (singular number, Nominative case). It is suggested 5–7 key words in Russian and English languages, at most 3 key words in the key phrase.

  1. Acknowledgements:

In this section the author acknowledges colleagues who contribute to the research or express criticism to the article. Before acknowledge someone, the author should obtain the consent from the person whom the author wants to show appreciation.

Organizations and funds should be acknowledged for sponsorship, i.e. specify grants, contracts, etc., that helped in conducting research.

  1. Full information about the author(s): full name, science degree, academic status, position, subdivision (department, faculty, laboratory, etc.), ORCID (it is necessary to register on https://orcid.org ), e-mail, mobile phone number. It is necessary to point out the corresponding author. Postgraduate students and students should specify full name, science degree and academic status of the scientific advisor.
  2. Example of arrangement in Russian:

 

УДК 543.257.2

ОПРЕДЕЛЕНИЕ РИМАНТАДИНА В ЛЕКАРСТВЕННОМ ПРЕПАРАТЕ
«ГРИППОМИКС» С ПОМОЩЬЮ ИОНОСЕЛЕКТИВНОГО ЭЛЕКТРОДА

И. С. Иванов1), П. В. Петров1), 2)

1)Учреждение БГУ «Научно-исследовательский институт физико-химических проблем»,
ул. Ленинградская, 14, 220030, г. Минск, Республика Беларусь
2)Белорусский государственный университет, пр. Независимости, 4, 220030, г. Минск, Республика Беларусь

Аннотация.

Ключевые слова.

Благодарность.

 

Иван Сергеевич Иванов – младший научный сотрудник  лаборатории физической химии.

ivanov@gmail.com

+375***

Петр Владимирович Петров –  кандидат химических наук, заведующий лабораторией физической химии1), доцент кафедры физической химии химического факультета2).

petrov@bsu.by

+375***

Контактный автор И. С. Иванов

 

  1. Items 2–8 should follow in the same order in English (see example of arrangement):

 

DETERMINATION OF RIMANTADINE IN DOSAGE FORM
«GRIPPOMIX» USING THE ION-SELECTIVE ELECTRODE

  1. S. Ivanova, P. V. Petrova,b

aResearch Institute for Physical Chemical Problems of the Belarusian State University,
14, Leningradskaya str., 220030 Minsk, Republic of Belarus
bBelarusian State University, 4, Nezavisimosti avenue, 220030, Minsk, Republic of Belarus

Corresponding author: ivanov@gmail.com

Abstract.

Keywords.

Acknowledgements.

 

Ivan S. Ivanov, junior researcher of the laboratory of physical chemistry.

Petr V. Petrov, PhD (chemistry); head of the laboratory of physical chemistrya and associate professor at the department of physical chemistry, faculty of chemistryb.

  1. If the article is written in Belarusian language, the same information (see item 9) should be specified in Belarusian language.
  2. In the articles published in the sections «Reviews», «Chronicle, Information», «Outstanding Scientists», «Jubilees», «To the Memory of Scientist» the article title should be presented in Russian and English languages; information about author(s) (full name, science degree, academic status, position, place of work, organization address, e-mail, corresponding author phone number) should also be written in Russian and English languages.

 

Article content

The article should consist of the following structural parts that are written boldface type.

  1. Introduction

Includes: urgency of research, correspondent literature review, stated problem, research aims and objectives.

  1. Materials and methods/theoretical framework

The part describes methods and framework of research/experiment as to allow other scientists to re-conduct the results relying on the article as well as use materials, devices, equipment, study samples and research/experimental conditions.

  1. Results and discussion

The part covers actual results of the research (texts, tables, graphs, diagrams, formulas, pictures, images), interpretation of the results, including their relevance to research hypothesis, as well as limitations of the research and generalization of the results, suggestion on practical application and further research directions.

  1. Conclusion

The part covers section summary. Duplication of wording from the sections should be avoided in the summary. The part can be included into the previous one.

  1. List of bibliographical references (in source language):
  2. a) The list includes only works that have been used during preparation of the article and have references in the text.
  3. b) References to the bibliographic sources should be arranged in accordance with their citation (mentioning) – a counting number of the reference and the citied page in the text should be written in square brackets (e.g. [1,3]).

Each source should have its counting number in the list.

  1. c) The list of the bibliographic sources should be arranged as follows:

– a book: name and initials of the author (if there are more than three authors, first sixth authors should be specified), book full title, place of publication, publisher, year of publication, pages.

Example: 1. Euwals R, Dagevos J, Gijsberts M. Immigration, integration and the labour market: Turkish immigrants in Germany and the Netherlands. Bonn: IZA; 2007. 120 p.

– articles from the journals, collections, materials and conferences, etc.:

Example: 1.  Dedov II, Shestakova MV, Vikulova OK. National register of diabetes mellitus in Russian Federation. Diabetes mellitus. 2015;18(3):5–22. Russian. DOI: 10.14341/DM201535-22.

                2. Rifickaya II, Pilipenko EV. [Motivation of student learning activities]. In: Shimov VN, editor. Ekonomicheskii rost Respubliki Belarus’: globalizatsiya, innovatsionnost’, ustoichivost’. Materialy XI Mezhdunarodnoi nauchno-prakticheskoi konferentsii; 17 maya 2018 g.; Minsk, Belarus’ [The economic growth of the Republic of Belarus: globalization, innovation, sustainability. Proceedings of the 11th International Scientific and Practical Conference, Minsk, 2018 May 17]. Minsk: Belarusian State Economic University; 2018. p. 397–398. Russian.

                3. Galuzo PR. [Motivation for achievement and conscious regulation of student learning activities]. In: Dauksha LM, Rakickaya AV, editors. Aktual’nye problemy professional’nogo razvitiya lichnosti [Actual problems of professional development of personality]. Grodno: Janka Kupala State University of Grodno; 2016. p. 79–85. Russian.

                 4. Hargittai E, Piper AM, Morris MR. From internet access to internet skills: digital inequality among older adults. Universal Access in the Information Society. 2019;18(4):881–890. DOI: 10.5167/uzh-168039.

                 5. Smith RE. A component analysis of athletic stress. In: Weiss M, Gould D, editors. Competitive sports for children and youths. Proceedings of the Olympic scientific congress. Champaign: Human Kinetics; 1985. p. 107–112.

d) the list of bibliographic references should be also written in Roman alphabet;

e) transliteration of description is not accepted – an article title or a book title should be translated in English: the description should be clear for foreign readers. It is suggested to translate the titles without transliteration and specify publication language (in Russ.) while citing Russian-language books, conferences, anonymous and other sources in case that it is know that they will not be included into international scientific databases.

j) transliteration standard variant for English-language systems – BSI – should be used for latinisation. It is possible to use transliteration system on http://translit.ru, choosing BSI standard.

 

Note.

Should not use the following documents, specified in References:

–    anonymous sources and regulatory documents (regulations, laws, instructions, etc.) that will not be indexed in citation databases;

–    inaccessible, unpublished, small editions, local, popular and educational sources: author’s abstracts and dissertations, newspapers, unpublished reports, study guides and course books, encyclopedias, readers, vocabularies;

–    electronic materials and Internet resources.

For recommendation: it is preferred to cite above mentioned documents in the text or in-cut references. The references should be arranged page-by-page, at the bottom of the page, numbered – from № 1 on each page.

 

Requirements to illustrations

Illustrations should complement the text and correspondent tables in the text rather than duplicate.

All illustrations should be arranged in the separate files (.jpg/.cdr/.tiff/.eps. formats or .psd (Adobe Photoshop) without merge layers).

The illustrations and graphs should be clear. The illustrations should be of the same scale, maximum illustration size should be at most 170×220 mm (including image-related text).

Minimum permissible resolution is 300 dpi. All symbols on the illustrations should be written Times New Roman. Image elements and graphs are numbers by italic Arabic numerals that are transcribed in image-related texts.

The illustrations are numbered in accordance with the order of their citation in the text.

Each illustration should have a short name and references to the text (e. g. fig. 1). The only illustration is not numbered.

 There should not be shorthand notations in the illustration and the graph, even if they are transcribed in the text (t, S, etc.)

All image-related texts should be duplicated in English language.

 

Requirements to tables

The tables should complement each other rather than duplicate.

The tables are numbered according to their order of citation in the text.

Each table should have a short name and references to the text (e. g. table 1). The only table in the text is not numbered. Column headings should be in accordance with their content. Abbreviations, used in the table, should be transcribed after the table.

There should not be empty columns in the table.

Table name is duplicated in English language.

 

Requirements to units

Measurement units for physical quantities are given in units of international metric system (System International – SI). For different compounds the terms of IUPAC should be used.

 

Requirements to formulas

Simple formulas and letter formulas (e. g. Σ, А1, βк, °С, etc.) should be pasted by means of menu tools “Insert. Symbol”. Complicated formulas should be written by means of formula editor MathType. Use exponentiation for complicated formulas. Brackets are written by means of marks “()” (the program aligns content height). Russian and Greek symbols are written Roman type, Latin symbols – Italic type.

Only formulas, that have references to the text, should be numbered.

The fractional part of a number written in decimal form is separated by the decimal mark (comma (e. g. 4,27) for Russian language, small dot (e. g. 4.27) for English language).

 

Requirements to abbreviations

Common abbreviations should be used in the text. Abbreviations should be avoided in the title of the manuscript. The entire term for which the abbreviation is used should be transcribed in the text for its first mention (the transcription is not necessary for measurement units and symbols).

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.